Sale!

Makita DLX2176TJ 18v Brushless Impact Driver/Combi Drill Twin Kit Inc 2 X 5.0ah Batteries & Charger In Case

(2 customer reviews)

£398.56

Makita DLX2176TJ 18V Brushless Twinpack. Two-piece kit containing the Makita dhp481 cordless drill and the new Makita DTD154 Impact Driver. Both brushless tools for higher efficiency and reliability, reduced noise, and longer service life. This kit includes 2x BL1850 5.0Ah batteries for the best run times allowing you to get the job done.

In stock

B01LWPCKU1

Makita DLX2176TJ 18V LXT 2 Piece Brushless Kit 2 x 5.0Ah Batteries & Charger in Case

Makita DLX2176TJ 18V Brushless Twinpack. Two-piece kit containing the Makita dhp481 cordless drill and the new Makita DTD154 Impact Driver. Both brushless tools for higher efficiency and reliability, reduced noise, and longer service life. This kit includes 2x BL1850 5.0Ah batteries for the best run times allowing you to get the job done.

Makita dlx2176tj 18v twin pack

Both brushless tools are designed to improve efficiency and reliability, reduce noise, and increase service life. This kit Improved durability under load due to a change in bearing type.  A battery fuel gauge provides a remaining fuel indication.  The Hammer Driver-Drill has 2 mechanical gears and variable-speed transmission for a wide range of drilling, fastening, and hammer drilling applications. It has a 13mm single sleeve keyless chuck to allow easy bit installation and removal and 21 clutch settings plus drill mode for added fastening control. The cordless tools feature an electric brake, twin LED job light with afterglow, 2 mechanical gears, variable speed control by a trigger, and so on.

DLX 2176TJ Features

  • Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
  • Forward/reverse rotation
  • Single sleeve keyless chuck allows for easy bit installation/removal by one hand
  • Electric brake
  • Twin LED job light with afterglow
  • 2 mechanical gears
  • Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity
  • Variable speed control by trigger
  • Best possible ergonomic handle for drill-driver applications
  • The compact overall length of 205mm
  • XPT - Extreme Protection Technology

Specifications

Makita DHP481Z:

  • Barcode: 088381826815
  • Chuck Capacity – 1.5 – 13mm
  • Blows per Minute (Hi) – 0 – 31,500ipm
  • Blows per Minute (Lo) – 0 – 8,250ipm
  • No Load Speed (Hi) 0 – 2100rpm
  • No Load Speed (Lo) 0 – 550rpm
  • Voltage – 18v
  • Max. in wood – 76mm
  • Max. in masonry – 16mm
  • Max. in steel – 13mm
  • Torque Settings – 21 + drill
  • Battery Type – Lithium-ion
  • Vibration K factor – 1.5 m/sec²
  • Maximum Output – 640w
  • Lock Torque – 125Nm
  • Max. Fastening Torque (Soft Joint) – 60Nm
  • Max. Fastening Torque (Hard Joint) – 115Nm
  • Vibration: Impact drilling into concrete – 6.5 m/sec²
  • Vibration: Drilling into metal – 2.5 m/sec²

Makita DTD154Z:

  • Barcode: 0088381824125
  • Voltage: 18V
  • Standard Bolt: M5-M16
  • High Tensile Bolt: M5-M14
  • Coarse thread (length): 22 – 125 mm
  • Max Fastening Torque: 175 Nm
  • Battery Type:Lithium-ion
  • Vibration: Fastening Bolt: 12.5 m/sec²
  • Vibration K factor: 1.5 m/sec²
  • Noise sound pressure: 96 dB(A)
  • Noise sound power: 107 dB(A)
  • Noise K factor: 3 dB(A)
  • Impact Selection: 3 stage + Tek mode
  • Driving Shank: 6.35mm (1/4″) Hex
  • Blows per Minute (Hi) – ipm: 0 – 3800 ipm
  • Blows per Minute (Med) – ipm: 0 – 2600 ipm
  • Blows per Minute (Lo) – ipm: 0 – 1100 ipm
  • Machine Screw: M4-M8
  • No Load Speed (hard/med/soft): 0-3600 / 2100 / 1100 rpm

Features

Makita DHP481Z:

  • Forward/reverse rotation.
  • Single sleeve keyless chuck allows for easy bit
  • installation/removal by one hand.
  • Electric brake.
  • Twin LED job light with afterglow.
  • 2 mechanical gears.
  • Battery fuel gauge.
  • Variable speed control by trigger.
  • Best possible ergonomic handle for drill-driver
  • applications.
  • Compact overall length.

Makita DTD154Z:

  • The DTD154 brushless impact driver features high operation efficiency with a 175Nm max torque, 4 pole motor, keyless single sleeve ¼” hex chuck, accepting M5 – M14 standard bolts, M4 – M8 machine screws making it ideal for repetitive screwdriving.
  • The impact driver has a no load speed of 3600rpm providing up to 3800ipm, the percussive action saving time and effort, driving screws up to 30% faster than a conventional drill/driver, no pilot hole is needed even into hardwood.
  • It features a maintenance free brushless motor for increased life, electronic brake, a conveniently located push button for forward and reverse and an LED job light with preglow for use in low visibility applications.
  • The compact & lightweight 1.5kg design of the DTD154 makes transportation around the worksite easy without compromising on power, whilst the redesigned belt clip and ergonomic soft grip handle provides maximum user comfort reducing fatigue on prolonged use, providing greater tool control.
  • The Makita DTD154Z is supplied as a tool only unit and has no batteries, charger or case making it the ideal way to build up an existing Makita 18V kit. Batteries and charger are available separately.

2 reviews for Makita DLX2176TJ 18v Brushless Impact Driver/Combi Drill Twin Kit Inc 2 X 5.0ah Batteries & Charger In Case

  1. James

    Very Nice

  2. Harry Jhonson

    Really good

Add a review

Your email address will not be published. Required fields are marked *