Sale!

Makita DTW285Z 18V LXT Cordless Brushless 1/2″ Impact Wrench Body Only

£145.73

The Makita DTW285 with Brushless Motor is very similar to the DTW281, but it has the additional benefit of “Reverse Rotation Auto-Stop Mode.” The Makita DTW285 Cordless Impact Wrench is an improved version of the DTW281 Cordless Impact Wrench. The Makita DTW285Z has a new mode called Reverse Rotation Auto-Stop Mode, which automatically prevents rotation after loosening a bolt. It also has a three-stage power range for maximum rpm and fastening torque.

In stock

B01NBA6GZT

Makita DTW285Z  Cordless Brushless 1/2" Impact Wrench 

The Makita DTW285 with Brushless Motor is very similar to the DTW281, but it has the additional benefit of "Reverse Rotation Auto-Stop Mode." The Makita DTW285 Cordless Impact Wrench is an improved version of the DTW281 Cordless Impact Wrench. The Makita DTW285Z has a new mode called Reverse Rotation Auto-Stop Mode, which automatically prevents rotation after loosening a bolt. It also has a three-stage power range for maximum rpm and fastening torque.

Makita DTW285Z Impact Wrench

The Model DTW285 is a cordless impact wrench with a powerful brushless DC motor that requires no maintenance. Since there is no friction loss caused by brushes, the energy consumption is higher, allowing lower amperage for less heat output and more work on a single full battery charge. Auto-stop mode with reverse rotation: This mode is only possible when the trigger is fully pulled in a counter-clockwise rotation. The tool stops the impact and rotation in 0.2 seconds after the bolt/nut has been sufficiently loosened. The Makita Cordless Impact Wrench is based on the DTW281 model and is powered by an 18V Li-ion battery (sold separately).

Makita DTW285Z Cordless Impact Wrench Features

  • Fuel gauge for the battery
  • Bumpy phosphorescent
  • Soft ergonomic grip
  • Trigger-controlled variable speed
  • With an overall length of 147mm, this is a small build.
  • This mode can only be activated by completely retracting the trigger in a counter-clockwise rotation.
  • Reverse rotation auto-stop mode: This mode is only available when the lever is completely pulled in a counter-clockwise rotation. When the bolt/nut is sufficiently loosened, the tool
  • prevents the impact and rotation in 0.2 seconds.
  • With an overall length of 147mm, this is a small build.
  • supplied with Battery safety circuit: This circuit is designed to protect the battery from damage caused by overcharging, high temperatures, or overload current.
  • Fuel gauge for the battery
  • Bumpy phosphorescent
  • Soft ergonomic grip
  • Electric braking system
  • Trigger-controlled variable speed
  • Rotation in the forward/reverse direction
  • LED work light
  • Motor with no brushes

Specification

  • Voltage: 18v
  • Nut Busting Torque: 400 Nm
  • Max Fastening Torque: 280 Nm
  • Driving Shank: 1/2″ Square
  • Blows per Minute (Hi): 0-3,500 ipm
  • Blows per Minute (Med): 0-2,600 ipm
  • Blows per Minute (Lo): 0-1,800 ipm
  • Standard Bolt: M10-M20
  • High Tensile Bolt: M10-M16
  • No Load Speed (hard): 0-2,800 rpm
  • No Load Speed (med): 0-2,100 rpm
  • No Load Speed (soft): 0-1,600 rpm
  • Net weight: 1.7 kg

Features

  • Electric brake
  • Variable speed control by trigger
  • Forward/reverse rotation
  • LED job light will light up the work area in dark conditions
  • Brushless motor for maintenance-free and more efficient operation
  • Compact design with an overall length of 147mm
  • Phosphorescent bumper
  • Ergonomic soft grip
  • Equipped with Battery protection circuit: designed to protect the battery from damages due to over-discharge, high temperature, or overload current
  • Battery fuel gauge
  • Reverse rotation auto-stop mode: This mode works only with pulling the trigger fully in counter-clockwise rotation. When the bolt/nut gets loosened enough, the tool stops the impact and rotation in 0.2 seconds